-40%
APC Smart-UPS RT 3000 & Battery Pack - Used
$ 396
- Description
- Size Guide
Description
APC Smart-UPS RT 3000. Condition is "Used"Battery Backup Ratings/Approvals
Unit Type: Uninterruptible Power Supply
Dimensions: 17" x 10.35" x 26.1"
Weight: 245 lbs
Input Voltage: 208V AC 1PH, 50/60Hz +/- 5Hz (Auto-sensing)
Output Voltage: 208V AC 1PH, 50/60Hz +/- 3Hz (User Adjustable +/- 0.1)
Output Power Capacity: 6000W/7500VA
Max Configurable Power: 6000W/7500VA
Output Voltage Distortion: Less Than 3%
Crest Factor: 3:1, Double Conversion Online
Waveform Type: Sine Wave
Battery Type: Maintenance-free Sealed Lead-Acid w/ Suspended Electrolyte, Leakproof (4 Modules)
Recharge Time: 2.2 Hours
Filtering: Full-time Multi-pole Noise Filtering: 0.3% IEEE Surge Let-through: Zero Clamping Response Time
Interface: DB-9 RS-232 , RJ-45 10/100 Base-T, Smart-Slot
Pre-Installed SmartSlotT Cards: AP9619
Control Panel: LED Status Display with Load and Battery Bar-graphs; On Line, On Battery, Replace Battery, Overload and Bypass Indicators
Audible Alarm: Alarm When on Battery, Distinctive Low Battery Alarm and Overload Continuous Tone Alarm
Emergency Power Off (EPO): Yes
Operating Temp: 0°C to 40°C
Operating/Storage Relative Humidity: 0-95%
Operating Elevation: 0-10,000`
Storage Temp: -15°C to 45°C
Storage Elevation: 0-50,000`
Materials: -
Hardware Material: Zinc Plated Steel Special Orders- Requirements
Enclosure Finish: Aluminum Lacquer Paint
Mount: Surface Mount
Input Connections: Hardwire 3-wire (2PH + G)
Output Connections: (1) Hardwire 3-wire (2PH + G) (Battery Backup) , (2) NEMA L6-20R (Battery Backup), (2) NEMA L6-30R (Battery Backup)
The APC Smart-UPS RT 3000 is an Industrial Uninterruptible Power Supply (UPS) for work sites and large facilities. This battery backup unit operates on single-phase 208V AC and features a recharge time of 2.2 hours. A control panel with LED display enables real-time monitoring and setup of the power device.
The MT-UPS-1P-208V-7.5KVA-208V-R1-N1 provides battery backup support for customer-provided equipment in work sites. This 7.5 KVA UPS features single-phase 208V AC 50/60 Hz (+/- 5Hz with auto-sensing) input and single-phase 208V AC, 50/60z (+/- 3Hz, user adjustable +/- 0.1) output. Equipped with an output power capacity and maximum configuration power of 6,000 watts/7500 VA, this unit contains a leakproof maintenance-free sealed lead acid with suspended electrolyte battery. The battery takes approximately 2.2 hours to recharge.
The sine-wave UPS features full time multi-pole noise filtering and an audible alarm that signals real-time status, low battery and overload condition. There are LED status displays and monitoring graphs on the control panel. The following interface ports are available on the unit: DB-9 RS-232, RJ-45 10/100 Base-T and Smart-Slot.
Wiring: This unit accepts hardwire, 3-wire (2PH + G) input connections. The following output connections are available: (1) Hardwire, 3-wire (2PH + G) (Battery Backup), (2) NEMA L6-20R (Battery Backup) and (2) NEMA L6-30R (Battery Backup).
Mounting: The MT-UPS-1P-208V-7.5KVA-208V-R1-N1 is compatible with surface mounting applications.